Solar Water Heaters
Natural Circulation Kits

The solar panel (collector) casing is made of specially designed extruded aluminium profile powder coated, without any external connections, screws, nuts or rivets. It has a special slot for the rubber sealing making it 100% watertight. At the same time the powerful support system will resist any weather conditions even typhoons.

The rockwool 40mm (50kg/m3) insulation of the solar panel (collector) will maintain very high temperatures, which along with the other technical characteristics, achieve an incredible high efficiency.

The absorber is composed of a full face copper sheet with blue super selective titanium coating of 0.20mm thickness (selective or non-selective aluminum absorbers are also available) and is welded to the copper pipes by ultrasonic or laser welding.

The primary heliothermic liquid achieves maximum transfer of heat to the water in the tank and at the same time protects the collector from scaling, rusting, freezing and overheating. The “heliothermic liquid” will last for a lifetime without needing to be replaced.

The solar panel’s glazing is 4 mm low iron solar prismatic tempered glass and ensures maximum penetration of irradiation. It is oven-treated at 700 ºC, achieving maximum strength and durability.

A special EPDM rubber profile ensures 100% water and vapor sealing. The rubber profile is covered by an aluminium profile on the top and sides of the solar water heater collector, protecting it from damage during transportation, stocking or installation.

Special blind rivet nuts on the back of the aluminium profile allows easy installation on: Flat roofs: the complete set of supports makes installation on flat roofs just simple. This aesthetic result proves the superiority design achieving a maximum height of 1m.

The pure magnesium anode effectively protects the cylinder from electrolysis, hence solar water heaters will never experience internal corrosion of the cylinder.

Very cloudy days are no problem due to plenty of hot water, thanks to the backup electric heater.

The thermostat with thermal cut out safety feature regulates the desired temperature of the hot water, with precision.

Forced Circulation Kits
The Forced Circulation Kits ensure supreme quality and incomparable advantages. Below are the specific characteristics of the Forced Circulation kits along with the details.
Model FCK-150 FCK-200 FCK-300 FCK-420 FCK-500
StorageTank BL1-150ltr BL2-200ltr BL2-300ltr BL2-420ltr BL2-500ltr
ClimasolCollector 1x2.70m² 2x2.00m² 3x2.50m² 3x2.70m² 4x2.00m²
PressureRegulator 1 1 1 1 1
SolarStation(pumpcontrolunit) 1 1 1 1 1
Expansiontank25ltr 1 1 1 1 1
SupportFrame 1x1 1x2 1x1+1x2 1x1+1x2 2x2
SetofFittingAccessories 1 1 1 1 1
Antifreeze“glycol”18kg 1 2 3 3 4
});